Y41 series single-column hydraulic press machine

Product Category

Y41 series single-column hydraulic press machine

Model : Y41 series

Brand : Teli machinery

Product Description

The performance characteristics of ：
This series of single-column hydraulic press by computer optimization upright C type structure design, rigidity, USES the steel plate welding, after welding by tempering aging treatment, ensure the fuselage never deformation. Hydraulic system installed in the fuselage, beautiful shape, compact structure, easy to operate. This series hydraulic press is equipped with independent hydraulic and electric control system, adopts the centralized control buttons, which can realize fixed distance and constant pressure molding process, machine, pressure can be adjusted within the prescribed scope; The press pressure head adopts four-column guide, with a partial load resistance.
Applicable fields ：
This series hydraulic press is suitable for the shaft parts, profile correction techniques, such as applicable to the shaft, sets of parts and simple installation plate parts tensile, bending, stamping, forming, blanking, such as technology, also can undertake general powder, plastic products.
For accessories ：
Correction workbench, imported PLC, manual or pedal operation, cantilever lifting hoist.
Technical parameters ：

The parameter name		unit	Single column hydraulic press
The parameter name		unit	YTL 41-6.3	YTL 41-10	YTL 41-16	YTL 41-25	YTL 41-40	YTL 41-63	YTL 41-100	YTL 41-160	YTL 41-200	YTL 41-315	YZW 30-400	YZW 30-500	YZW 30-630	YZW 30- 800
Nominal pressure		KN	63	100	160	250	400	630	1000	1600	2000	3150	4000	5000	6300	8000
Liquid maximum working pressure		MPa	25	25	25	25	25	25	25	25	25	25	25	25	25	25
Opening height		mm	400	500	500	500	700	800	900	1000	1200	1250	1250	1500	1500	1500
stroke		mm	250	300	350	350	400	400	500	500	700	800	800	900	900	900
Deep throat		mm	200	250	300	300	320	320	350	350	450	1200	1300	1500	1500	1500
Blanking aperture		mm	80	80	100	100	100	150	150	220	220	220	220	220	220	220
Stroke speed	The downside	mm∕s	50	50	50	50	50	50	40	25	90	100	100	100	100	100
Stroke speed	The return trip	mm∕s	100	100	120	120	120	110	100	65	60	65	70	70	70	70
Table size	Or so	mm	360	55	600	600	700	800	800	800	1000	1800	2000	2000	2500	3000
Table size	Before and after	mm	360	430	500	500	550	650	650	700	900	1600	1800	1800	2000	2400
The workbench high from the ground		mm	700	710	710	710	600	600	650	650	900	1200	1400	1400	1095	1095
Overall dimensions	Or so	mm	500	500	650	680	1500∕ 800	2100∕ 1000	2500∕ 1100	2500∕ 1180	1600	3200	3500	3500	11000	11000
	Before and after	mm	800	950	1100	1100	1200	1300	1600	1750	2000	4300	4500	5500	8000	8000
	highly	mm	1700	1800	1900	2200	2500	2500	2800	2850	3600	5300	5300	6300	7010	7010
Motor total power		KW	2.2	4	4	4	5.5	7.5	7.5	11	15	22	22	37	37	37

Because in the continuous improvement of products, such as with the above technical data, configuration, performance characteristics and the actual data products are inconsistent, should comply with the technical agreement parameters on both sides. No further notice